У меня MikroTik RB952Ui-5ac2nD в качестве маршрутизатора (CAPsMan) и Mikrotik wsAP AC Lite в качестве точки доступа (CAP).
Wi-Fi работает нормально, но порты LAN на AP AC Lite не обеспечивают доступ в Интернет через кабель Ethernet.
Все порты в мосте, но это не помогает ...
Есть идеи, как я могу заставить эту установку работать ...?
конфиги ниже...
============AP Lite config===========
Код: Выделить всё
# jun/14/1970 05:22:14 by RouterOS 6.47
# software id = WBDM-4RE6
#
# model = RBwsAP-5Hac2nD
# serial number = B8820B24B5BC
/interface bridge
add name=bridge1
/interface wireless
# managed by CAPsMAN
# channel: 2412/20-Ce/gn(18dBm), SSID: machina2, CAPsMAN forwarding
set [ find default-name=wlan1 ] ssid=MikroTik
# managed by CAPsMAN
# channel: 5180/20-Ceee/ac(14dBm), SSID: machina5, CAPsMAN forwarding
set [ find default-name=wlan2 ] ssid=MikroTik
/interface wireless security-profiles
set [ find default=yes ] supplicant-identity=MikroTik
/ip hotspot profile
set [ find default=yes ] html-directory=flash/hotspot
/interface bridge port
add bridge=bridge1 interface=ether2
add bridge=bridge1 interface=ether3
add bridge=bridge1 interface=wlan1
add bridge=bridge1 interface=wlan2
/interface wireless cap
#
set discovery-interfaces=ether1 enabled=yes interfaces=wlan1,wlan2
/system identity
set name=AP2Код: Выделить всё
# jan/03/2021 17:14:00 by RouterOS 6.47
# software id = 3BYN-IVVH
#
# model = RB952Ui-5ac2nD
# serial number = BEB80B38016B
/caps-man channel
add band=2ghz-b/g/n frequency=2412 name=channel2 tx-power=20
add band=5ghz-a/n/ac frequency=5180 name=channel5 tx-power=20
/interface bridge
add admin-mac=C4:AD:34:59:80:54 auto-mac=no comment=defconf name=bridge
add name="bridge1- guest"
/interface ethernet
set [ find default-name=ether1 ] mac-address=E8:94:F6:B8:41:B9
/interface wireless
# managed by CAPsMAN
# channel: 2412/20-Ce/gn(20dBm), SSID: machina2, CAPsMAN forwarding
set [ find default-name=wlan1 ] antenna-gain=0 band=2ghz-b/g/n channel-width=\
20/40mhz-XX country=no_country_set distance=indoors frequency=auto \
frequency-mode=manual-txpower installation=indoor mode=ap-bridge ssid=\
machina2 wireless-protocol=802.11
# managed by CAPsMAN
# channel: 5180/20-Ceee/ac(17dBm), SSID: machina5, CAPsMAN forwarding
set [ find default-name=wlan2 ] antenna-gain=0 band=5ghz-a/n/ac \
channel-width=20/40/80mhz-XXXX country=no_country_set distance=indoors \
frequency=auto frequency-mode=manual-txpower installation=indoor mode=\
ap-bridge ssid=machina5 wireless-protocol=802.11
/caps-man datapath
add bridge=bridge client-to-client-forwarding=yes name=datapath1
add bridge="bridge1- guest" name=datapath2-guest
/caps-man security
add authentication-types=wpa2-psk encryption=aes-ccm group-encryption=aes-ccm \
name=security1
add name=security2-guest
/caps-man configuration
add channel=channel2 datapath=datapath1 mode=ap name=cfg2 rx-chains=0,1,2 \
security=security1 ssid=machina2 tx-chains=0,1,2
add channel=channel5 datapath=datapath1 mode=ap name=cfg5 security=security1 \
ssid=machina5
add channel=channel2 datapath=datapath2-guest mode=ap name=cfg2-guest \
rx-chains=0,1,2,3 security=security2-guest ssid=guest2 tx-chains=0,1,2,3
add channel=channel5 datapath=datapath2-guest mode=ap name=cfg5-guest \
rx-chains=0,1,2,3 security=security2-guest security.authentication-types=\
"" ssid=guest5 tx-chains=0,1,2,3
/interface list
add comment=defconf name=WAN
add comment=defconf name=LAN
/interface wireless security-profiles
set [ find default=yes ] authentication-types=wpa-psk,wpa2-psk mode=\
dynamic-keys supplicant-identity=MikroTik
/ip hotspot profile
set [ find default=yes ] html-directory=flash/hotspot
/ip pool
add name=dhcp ranges=192.168.88.10-192.168.88.254
add name=dhcp_pool1 ranges=192.168.10.2-192.168.10.254
/ip dhcp-server
add address-pool=dhcp disabled=no interface=bridge name=defconf
add address-pool=dhcp_pool1 disabled=no interface="bridge1- guest" name=dhcp1
/queue type
add kind=pcq name=queue1-guest-download pcq-classifier=dst-address \
pcq-dst-address6-mask=64 pcq-rate=5M pcq-src-address6-mask=64
add kind=pcq name=queue2-guest-upload pcq-classifier=src-address \
pcq-dst-address6-mask=64 pcq-rate=5M pcq-src-address6-mask=64
/queue simple
add max-limit=5M/5M name=queue1-guest queue=\
queue2-guest-upload/queue1-guest-download target=192.168.10.0/24
/user group
set full policy="local,telnet,ssh,ftp,reboot,read,write,policy,test,winbox,pas\
sword,web,sniff,sensitive,api,romon,dude,tikapp"
/caps-man manager
set enabled=yes
/caps-man provisioning
add action=create-dynamic-enabled hw-supported-modes=gn master-configuration=\
cfg2 slave-configurations=cfg2-guest
add action=create-dynamic-enabled master-configuration=cfg5 \
slave-configurations=cfg5-guest
/interface bridge port
add bridge=bridge comment=defconf interface=ether2
add bridge=bridge comment=defconf interface=ether3
add bridge=bridge comment=defconf interface=ether4
add bridge=bridge comment=defconf interface=ether5
add bridge=bridge comment=defconf interface=wlan1
add bridge=bridge comment=defconf interface=wlan2
/ip neighbor discovery-settings
set discover-interface-list=LAN
/interface detect-internet
set detect-interface-list=all
/interface list member
add comment=defconf interface=bridge list=LAN
add comment=defconf interface=ether1 list=WAN
/interface wireless cap
#
set discovery-interfaces=bridge enabled=yes interfaces=wlan1,wlan2
/ip address
add address=192.168.88.1/24 comment=defconf interface=ether2 network=\
192.168.88.0
add address=192.168.10.1/24 interface="bridge1- guest" network=192.168.10.0
/ip dhcp-client
add comment=defconf disabled=no interface=ether1
/ip dhcp-server network
add address=192.168.1.0/24 gateway=192.168.1.1
add address=192.168.10.0/24 gateway=192.168.10.1
add address=192.168.88.0/24 comment=defconf gateway=192.168.88.1
/ip dns
set allow-remote-requests=yes
/ip dns static
add address=192.168.88.1 name=router.lan type=A
/ip firewall filter
add action=accept chain=input comment=UnblockCapsman dst-address-type=local \
src-address-type=local
add action=accept chain=input comment=\
"defconf: accept established,related,untracked" connection-state=\
established,related,untracked dst-address-type=local dst-limit=\
1,5,dst-address/1m40s src-address-type=local
add action=drop chain=input comment="defconf: drop invalid" connection-state=\
invalid
add action=accept chain=input comment="defconf: accept ICMP" protocol=icmp
add action=accept chain=input dst-address-type=local src-address-type=local
add action=drop chain=input comment="defconf: drop all not coming from LAN" \
in-interface-list=!LAN
add action=accept chain=forward comment="defconf: accept in ipsec policy" \
ipsec-policy=in,ipsec
add action=accept chain=forward comment="defconf: accept out ipsec policy" \
ipsec-policy=out,ipsec
add action=fasttrack-connection chain=forward comment="defconf: fasttrack" \
connection-state=established,related src-address=192.168.88.0/24
add action=accept chain=forward comment=\
"defconf: accept established,related, untracked" connection-state=\
established,related,untracked
add action=drop chain=forward comment="defconf: drop invalid" \
connection-state=invalid
add action=drop chain=forward comment=\
"defconf: drop all from WAN not DSTNATed" connection-nat-state=!dstnat \
connection-state=new in-interface-list=WAN
/ip firewall nat
add action=masquerade chain=srcnat comment="defconf: masquerade" \
ipsec-policy=out,none out-interface-list=WAN
/ip route rule
add action=drop dst-address=192.168.10.0/24 src-address=192.168.88.0/24
add action=drop dst-address=192.168.88.0/24 src-address=192.168.10.0/24
/system clock
set time-zone-name=Europe/Kiev
/system identity
set name=ROUTER
/tool mac-server
set allowed-interface-list=LAN
/tool mac-server mac-winbox
set allowed-interface-list=LAN
