aug/24 14:15:05 interface,warning sfp10: bridge port received packet with own address as source address (64:d1:54:f9:08:eb), probably loop
В чем проблема ? помогите плиз
конфиг всех
Код: Выделить всё
# aug/24/2018 13:42:33 by RouterOS 6.42.6
# model = CRS112-8P-4S
/interface bridge
add admin-mac=64:D1:54:F9:45:33 auto-mac=no name=bridge1 protocol-mode=none
/interface ethernet
set [ find default-name=ether1 ] comment=lan_1.0
set [ find default-name=ether8 ] comment=lan_2.0
set [ find default-name=sfp9 ] comment=2
set [ find default-name=sfp10 ] comment=2
set [ find default-name=sfp11 ] comment=3
set [ find default-name=sfp12 ] comment=3
/interface vlan
add interface=bridge1 name=vlan11 vlan-id=11
/interface ethernet switch
set drop-if-invalid-or-src-port-not-member-of-vlan-on-ports="ether1,ether2,eth\
er3,ether4,ether5,ether6,ether7,ether8,sfp9,sfp10,sfp11,sfp12"
/interface ethernet switch trunk
add member-ports=sfp9,sfp10 name=trunk-9-10
add member-ports=sfp11,sfp12 name=trunk-11-12
/interface bridge port
add bridge=bridge1 interface=ether1
add bridge=bridge1 interface=ether2
add bridge=bridge1 interface=ether3
add bridge=bridge1 interface=ether4
add bridge=bridge1 interface=ether5
add bridge=bridge1 interface=ether6
add bridge=bridge1 interface=ether7
add bridge=bridge1 interface=ether8
add bridge=bridge1 interface=sfp9
add bridge=bridge1 interface=sfp10
add bridge=bridge1 interface=sfp11
add bridge=bridge1 interface=sfp12
/interface ethernet switch egress-vlan-tag
add tagged-ports=trunk-9-10,trunk-11-12,switch1-cpu vlan-id=11
add tagged-ports=trunk-9-10,trunk-11-12 vlan-id=22
/interface ethernet switch ingress-vlan-translation
add new-customer-vid=11 ports=ether1,ether2,ether3,ether4,ether5,ether6
add new-customer-vid=22 ports=ether7,ether8
/interface ethernet switch vlan
add ports="trunk-9-10,trunk-11-12,switch1-cpu,ether1,ether2,ether3,ether4,ethe\
r5,ether6" vlan-id=11
add ports=trunk-9-10,trunk-11-12,ether7,ether8 vlan-id=22
/ip dhcp-client
add dhcp-options=hostname,clientid disabled=no interface=vlan11
/system identity
set name=1
# aug/24/2018 13:42:33 by RouterOS 6.42.6
# model = CRS112-8P-4S
/interface bridge
add admin-mac=64:D1:54:FE:46:1D auto-mac=no name=bridge1 protocol-mode=none
/interface ethernet
set [ find default-name=ether1 ] comment=D26
set [ find default-name=ether2 ] comment=D25
set [ find default-name=ether6 ] comment=wifi
/interface vlan
add interface=bridge1 name=vlan11 vlan-id=11
/interface ethernet switch
set drop-if-invalid-or-src-port-not-member-of-vlan-on-ports="ether1,ether2,eth\
er3,ether4,ether5,ether6,ether7,ether8,sfp9,sfp10,sfp11,sfp12"
/interface ethernet switch trunk
add member-ports=sfp9,sfp10 name=trunk-9-10
add member-ports=sfp11,sfp12 name=trunk-11-12
/interface bridge port
add bridge=bridge1 interface=ether1
add bridge=bridge1 interface=ether2
add bridge=bridge1 interface=ether3
add bridge=bridge1 interface=ether4
add bridge=bridge1 interface=ether5
add bridge=bridge1 interface=ether6
add bridge=bridge1 interface=ether7
add bridge=bridge1 interface=ether8
add bridge=bridge1 interface=sfp9
add bridge=bridge1 interface=sfp10
add bridge=bridge1 interface=sfp11
add bridge=bridge1 interface=sfp12
/interface ethernet switch egress-vlan-tag
add tagged-ports=trunk-9-10,trunk-11-12,switch1-cpu vlan-id=11
add tagged-ports=trunk-9-10,trunk-11-12 vlan-id=22
/interface ethernet switch ingress-vlan-translation
add new-customer-vid=11 ports=ether1,ether2,ether3,ether4,ether5,ether6
add new-customer-vid=22 ports=ether7,ether8
/interface ethernet switch vlan
add ports="trunk-9-10,trunk-11-12,switch1-cpu,ether1,ether2,ether3,ether4,ethe\
r5,ether6" vlan-id=11
add ports=trunk-9-10,trunk-11-12,ether7,ether8 vlan-id=22
/ip dhcp-client
add dhcp-options=hostname,clientid disabled=no interface=vlan11
/system identity
set name=2
# aug/24/2018 14:03:40 by RouterOS 6.42.6
# model = CRS112-8P-4S
/interface bridge
add admin-mac=64:D1:54:F9:08:EB auto-mac=no name=bridge1 protocol-mode=none
/interface ethernet
set [ find default-name=ether1 ] comment=OHRANA
set [ find default-name=ether2 ] comment=D1
set [ find default-name=ether3 ] comment=D3
set [ find default-name=ether4 ] comment=D4
set [ find default-name=ether5 ] comment=D2
set [ find default-name=ether6 ] comment=D24
set [ find default-name=ether8 ] disabled=yes poe-out=off
/interface vlan
add interface=bridge1 name=vlan11 vlan-id=11
/interface ethernet switch
set drop-if-invalid-or-src-port-not-member-of-vlan-on-ports="ether1,ether2,eth\
er3,ether4,ether5,ether6,ether7,ether8,sfp9,sfp10,sfp11,sfp12"
/interface ethernet switch trunk
add member-ports=sfp9,sfp10 name=trunk-9-10
add member-ports=sfp11,sfp12 name=trunk-11-12
/interface bridge port
add bridge=bridge1 interface=ether1
add bridge=bridge1 interface=ether2
add bridge=bridge1 interface=ether3
add bridge=bridge1 interface=ether4
add bridge=bridge1 interface=ether5
add bridge=bridge1 interface=ether6
add bridge=bridge1 interface=ether7
add bridge=bridge1 interface=ether8
add bridge=bridge1 interface=sfp9
add bridge=bridge1 interface=sfp10
add bridge=bridge1 interface=sfp11
add bridge=bridge1 interface=sfp12
/interface ethernet switch egress-vlan-tag
add tagged-ports=trunk-9-10,trunk-11-12,switch1-cpu vlan-id=11
add tagged-ports=trunk-9-10,trunk-11-12 vlan-id=22
/interface ethernet switch ingress-vlan-translation
add new-customer-vid=11 ports=ether1,ether2,ether3,ether4,ether5,ether6
add new-customer-vid=22 ports=ether7,ether8
/interface ethernet switch vlan
add ports="trunk-9-10,trunk-11-12,switch1-cpu,ether1,ether2,ether3,ether4,ethe\
r5,ether6" vlan-id=11
add ports=trunk-9-10,trunk-11-12,ether7,ether8 vlan-id=22
/ip dhcp-client
add dhcp-options=hostname,clientid disabled=no interface=vlan11
/system identity
set name=3
